Rust: the worst nightmare of every straight razor possessor. Once you encounter it, the next thing to do best is to know how to restore a directly razor.

Rust is a chemical reaction where a metal oxidizes when it comes in contact with moisture, which is mostly the example for your razor since it is mainly for moisture shaving.

There are two reasons why you lot need to go rid of the rust on your straight razor. Starting time, it tin quickly wearisome and damage your blades. Second, it will cause you a lot of discomforts.

If your razor is not sharp enough, it may tug on your pare and may get out some nicks and bumps on your face. Sometimes, shaving may involve cuts, which can pb to complications when exposed to a rusty razor.

This, and so, makes it our superlative priority to make sure to remove all those rusty spots.

Hence, in this article, we will let y'all know everything at that place is to know about straight razor restoration:

  • Preventing Rusts On Razor Blades
  • Straight Razor Blade Oil And Balm
    • How To Remove Rust Spots On Your Razor
    • Is It Okay To Apply A Metal Cleaner Or Polisher?
    • What To Invest

    Preventing Rusts On Razor Blades

    It is always best to set up before the storm comes. Fixing its ruins afterwards is more troublesome. So, as much as possible, exercise all the ways to protect your razor from rust. The near constructive method is cleaning it properly. At that place are ii simple ways to prevent yours from rusting, which are the following:

    • CLAYGO: Make clean Information technology Equally You lot Go

      The first step is to clean your razor after every utilize. Cleaning could involve merely rinsing the bract, removing all the hair, shaving foam, dead peel, and all the other materials attached to it as you were shaving.

      You tin can also become the extra mile and rub it with a cloth damped in 70% isopropyl alcohol to kill off any illness-causing leaner that may be hanging out on your blade'south surface.

      Later rinsing your direct razor, brand certain to wipe information technology with a clean rag to remove all wet. Then, use a hairdryer to dry out it off completely.

      Meanwhile, here are some dos and don'ts of cleaning a direct razor that you need to keep in mind:
      Do's and Don'ts of Cleaning a Straight Razor

      • Do hone your blade earlier shaving
      • Don't wet the scales
      • Do clean the razor blade regularly
      • Don't leave razor in a moisture or moist place
      • Do rinse the razor with the soapy water
      • Don't forget to lubricate the razor with oil
      • Do wipe the blade with few drops of alcohol
      • Don't forget to shop in a dry out identify similar a razor stand

      Cleaning a straight razor may seem straightforward; launder it make clean, and that is information technology. But at that place is more than to information technology if yous genuinely want to go along your blades from getting rust.

    • Keep It Dry

      Straight Razor Stand

      When you use a razor stand up, your direct razor tin exist thoroughly stale and be far away from the germs and bacteria in your sink.

      The second step is to keep the razor away from major sources of moisture, such as the bathroom. However, in that location is no guarantee that it will non rust if you do not put it in the bathroom. The central to keeping it abroad from moisture is to let it rest in a well-ventilated surface area with enough air circulation and less humidity.

      Another mode that could bailiwick your razor to wet is if you put information technology in the sink since it is straight in contact with the surfaces that would often get moisture. So, it volition be a good investment for your razor to have its stand up, similar our Silverback Directly Razor Stand up.

      The takeaway is that overexposure to wet volition cause your directly razor's demise. Then, as soon as yous cease using your razor, clean, sterilize, and dry it to prevent rust formation.

    Direct Razor Blade Oil and Balm

    Despite having a razor made from loftier-quality materials that y'all maintained properly through stropping and honing, wet shaving even so makes it inevitable to rust. That is why you need to utilise proper straight razor care to brand information technology last for life.

    • Blade OilAside from cleaning your blades and keeping them away from moisture, applying oil on the blade subsequently using it is another way to continue rusting at bay. You simply have to brand sure that your blade is completely dry out before applying the oil. Putting oil on a clammy blade volition trap the moisture and trigger the metal to oxidize.
    • Blade Balm

      Beard to Blade Balm

      Naked Armor's Beard to Bract Balm is the pure, natural, organic answer to keep your blade rust-free and clean .

      Another choice for protecting your blade from rust is using a lotion. Similar oil, applying a bract balm on the thoroughly dry bract may preserve the bract until your subsequent usage. You can get the near benefit, particularly if the balm you are using is pure and complimentary from any chemicals, which may exist harmful to your razors and face.

      Naked Armor's Beard to Blade Balm tin protect non but your blade simply your face and beard as well. Nosotros made it for your beard, face up, and your blade. Hence, you tin can use information technology to your face, torso, hand, and beard for moisturizing protection.

      You tin as well apply this all-purpose lotion to your razor and leave it on until your adjacent shave to maintain the quality of your blade and protect information technology from external factors that tin can cause corrosion. Our Beard to Blade Lotion is simply a convenient and practical way to ensure that both your bristles and your razor stay in shape.

    How To Remove Rust Spots On Your Razor

    If, despite all the pampering, the inevitable comes and rust spots show up on your razors, here are some home remedies that you may endeavour out to remove rust from your straight razor. Habitation essentials such as lemon, salt, vinegar, and blistering soda may be able to help y'all go out those spots that hinder your blade from performing well.

    Here are the things you need to know how to restore a straight razor when rusts form:

      • LemonLemon is one of the best natural cleaners considering of its natural acid content. The acerbity of the lemon can pause downwards iron oxide or rust.

        To utilise lemon in removing rust from a directly razor, you must first soak the blade in one-half of a lemon extract or juice for 30 seconds to one minute. If your directly razor has a wooden handle, information technology would be meliorate not to include it in the procedure as the acid may cause harm to the wood instead.

        After that, sprinkle sea salt on the other half of the lemon and scrub off the rust spots in the blade. When all the rust spots are gone, rinse the bract thoroughly in running water and dry it off entirely before keeping it.

      • White VinegarVinegar is besides a suitable cleaning agent. It is more effective with salt because the latter increases the potency of the vinegar'southward acidity, making information technology capable of removing rust.

        You tin submerge the blade in vinegar for xxx seconds to 1 minute. Again, information technology is best to exclude its wooden handles from the process. And so, make a vinegar and salt mixture and rub it on the blade using a toothbrush until all the rust spots are gone. To finish information technology off, you volition rinse it thoroughly in running water and dry it off entirely before keeping it.
      • Blistering SodaBesides known as sodium bicarbonate, baking soda is famous for its versatility since information technology is a baking ingredient. However, aside from that, it is also a good cleaner for different surfaces.

        Baking soda is a salt that is why information technology is a neutral compound. But what makes it a proficient cleaning tool is despite its neutrality, it has a higher pH making information technology a slightly basic component.

        Like the 2nd step when using vinegar, y'all will make a paste using h2o and baking soda. The paste will have to be thick enough to stay when you apply it to the blade. Then, employ the paste to the blade and let it stay for about xxx minutes, ensuring all the rusty spots are covered. Rinse information technology in running water and observe how the rust washes away from the blade's surface.

        At that place is no guarantee that the rust will launder off on your first try. In example there are stubborn spots that stay, use a toothbrush to scrub them off. Then, rinse over again in running water and dry information technology before keeping.

      • SandpaperWhen you are dealing with extra stubborn rusts, you lot can opt to apply a tool that might be available at abode or could exist available with a bit of run to hardware—sandpaper.

        Mitt sanding could exist done dry out or moisture. Often, users would recommend using wet-sanding—where you would utilise the sandpaper under running h2o since they believe this creates a smoother cease than when information technology is washed dry.

        Experts allocate sandpaper according to its grit—the lower the dust, the lesser its impact when used confronting a surface. We recommend starting with sandpaper with 220 grit if y'all are merely dealing with minor rusting. Just for the rust spots that are stubborn and will not easily come off, you would go upward to the ones with more grit. Move from ane dust to some other gradually as it might impairment your blade if you get directly from 220 up to 1000 grit.

        It will besides aid if you cut the sandpaper into bits. Yous could cut them into a quarter of their original size upwardly to as small-scale as i"x1". Doing so allows you to control where to place it on your blade. Working with a bigger piece would probably let you hit areas you do not intend to striking, primarily if you only deal with minimal rust spots. Another hack bachelor is for you to get a cork and wrap your sandpaper on the trunk of the cork, giving you a shape that could fit well to the angle or curve of the bract.

        Be conscientious with using sandpaper to restore a direct razor, though. At that place is a high take chances that it volition damage the etching on your blade.

    Please note, nevertheless, that the effectiveness of the home remedies suggested is not guaranteed. It is all the same on a case-to-case footing. Hence, information technology is entirely up to yous to try using them or not. Your journey with your straight razor is a learning process that you lot fill in through feel.

      Is It Okay To Apply A Metallic Cleaner Or Polisher?

      Information technology is not an absolute "no," but experts highly discourage using a polisher to restore straight razors and get rid of rust. Yes, the metal cleaner or polisher may remove rust from a straight razor, but the chemical that might linger on your bract could exist harmful to your skin. If y'all want to attempt this, you lot can utilise either Flitz or Maas.

      You may finish it off by soaking a cotton ball with alcohol and wiping it off on the blade in all these methods. Doing it volition hasten the drying process of the blade likewise equally sanitize it. Upon making sure that the blade is completely dry out, y'all may add the oil or Beard to Bract Balm for added protection.

      What To Invest

      Despite the availability of home remedies and other means to remove rust from a straight razor, it would still be amend to directly your investment on prevention rather than the possible cure. They are there in case there are conditions that you cannot control, which may pb to your blade's rusting.

      The purpose of you switching to a straight razor is immovability. Nonetheless, it will only be the lifelong grooming tool y'all hope to exist if you exercise proper care and maintenance. That is why yous as well need to consider everything about razor maintenance when switching to wet shaving with a straight razor.

      We suggest you lot get your easily on a straight razor shaving kit to accept nigh of the things yous demand to maintain your bract in ane box. You tin can also go our Beard to Blade Balm and Silverback Razor Stand Kit to aid you in the prevention.

      These are only initial greenbacks outlays that may refrain y'all from spending more in the future. These products are wise purchases now every bit you can reap their benefits in the future since they ensure the longevity of your razor. And since you at present know how to restore a straight razor, you lot would not be overwhelmed in case your razor indeed did rust.

      Always stay flawless—both your shave and your razor bract.

      Visit our site to meet more of our products.

      Essential Naked Armor Reads:

      Back to News & Blog